Non-Marking Rubber Tyre with Pressed Steel Centre, Bolt Hole Castor, NL Duty
Series Description:
Suitable for trolleys with light-duty loads, also in presence of obstacles and for indoor-outdoor use. The grey non-marking rubber tyre makes them suitable for use on fragile floors as well as in domestic/institutional environments.
Product Description
Standard Duty Loads Zinc Plated Pressed Steel Castor Housings
 Part Number |
|---|
| 237701 |
| 237702 |
| 237703 |
| 237704 |
| 237711 |
| 237710 |
| 237706 |
 WheelDiameter |
 Wheel Width |
 Overall Height |
 Top PlateOuter Dimension |
 Hole Spacing |
 Hole Width |
 4km Carry Capacity |
 Weight |
 Temperature |
 Hardness |
 Bore Diameter |
 Hub Length |
 Bolt Hole Race Diameter |
 Bolt Hole Diameter |
 Offset |
 Threaded Stem Diameter |
 Threaded Stem Length |
 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 80 | 25 | 107 | N/A | N/A | N/A | 65 | 0.61 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 80 | N/A | N/A | Request Drawing |
| 100 | 30 | 128 | N/A | N/A | N/A | 80 | 0.74 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 37 | N/A | N/A | Request Drawing |
| 125 | 37.5 | 157 | N/A | N/A | N/A | 130 | 1.09 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 39 | N/A | N/A | Request Drawing |
| 140 | 37.5 | 176 | N/A | N/A | N/A | 150 | 1.23 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 37 | N/A | N/A | Request Drawing |
| 150 | 40 | 182 | N/A | N/A | N/A | 170 | 1.35 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 37 | N/A | N/A | Request Drawing |
| 160 | 40 | 193 | N/A | N/A | N/A | 180 | 1.78 | -20/60 | 80 Shore A | N/A | N/A | 106 | 20 | 56 | N/A | N/A | Request Drawing |
| 200 | 50 | 236 | N/A | N/A | N/A | 230 | 3.16 | -20/60 | 80 Shore A | N/A | N/A | 106 | 20 | 56 | N/A | N/A | Request Drawing |
 Part Number |
|---|
| 237901 |
| 237902 |
| 237903 |
| 237904 |
| 237911 |
| 237910 |
| 237906 |
| Wheel Diameter |
Wheel Width |
Overall Height |
Top Plate Outer Dimension |
Hole Spacing |
Hole Width |
4km Carry Capacity |
Weight |
Temperature |
Hardness |
Bore Diameter |
Hub Length |
Bolt Hole Race Diameter |
Bolt Hole Diameter |
Offset |
Threaded Stem Diameter |
Threaded Stem Length |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 80 | 25 | 107 | N/A | N/A | N/A | 65 | 0.63 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 39 | N/A | N/A | Request Drawing |
| 100 | 30 | 128 | N/A | N/A | N/A | 80 | 0.76 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 37 | N/A | N/A | Request Drawing |
| 125 | 37.5 | 157 | N/A | N/A | N/A | 130 | 1.12 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 39 | N/A | N/A | Request Drawing |
| 140 | 37.5 | 176 | N/A | N/A | N/A | 150 | 1.26 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 37 | N/A | N/A | Request Drawing |
| 150 | 40 | 182 | N/A | N/A | N/A | 170 | 1.38 | -20/60 | 80 Shore A | N/A | N/A | 80 | 12 | 37 | N/A | N/A | Request Drawing |
| 160 | 40 | 193 | N/A | N/A | N/A | 180 | 1.85 | -20/60 | 80 Shore A | N/A | N/A | 106 | 20 | 56 | N/A | N/A | Request Drawing |
| 200 | 50 | 236 | N/A | N/A | N/A | 230 | 3.22 | -20/60 | 80 Shore A | N/A | N/A | 106 | 20 | 56 | N/A | N/A | Request Drawing |